Справочник Пользователя для Philips DSX 5350
12
I
NSERTING YOUR
A
CCESS
C
ARD
The access card provided with your system
includes information about your purchase
authorization and other data. To watch channels,
your viewing access card needs to be inserted in
the access card slot on the rear of your Satellite
Receiver.
includes information about your purchase
authorization and other data. To watch channels,
your viewing access card needs to be inserted in
the access card slot on the rear of your Satellite
Receiver.
When the card is removed, the system will not
display any programming guides or video signal.
The message, "Please insert your Access Card"
will show on the TV screen.
display any programming guides or video signal.
The message, "Please insert your Access Card"
will show on the TV screen.
The access card only needs to be inserted during
system setup and generally does not need to be
removed. Each access card has a unique number.
Be sure to record this number in the space
provided on the back cover of this manual.
system setup and generally does not need to be
removed. Each access card has a unique number.
Be sure to record this number in the space
provided on the back cover of this manual.
Hold the card with the arrow facing upwards
and pointing toward the slot in the Satellite
Receiver rear panel.
and pointing toward the slot in the Satellite
Receiver rear panel.
Gently push the card into the slot until it meets
the stop. Do not use undue force when inserting.
The end will be visible outside of the slot.
the stop. Do not use undue force when inserting.
The end will be visible outside of the slot.
Keep your access card permanently inserted in
your Satellite Receiver.
your Satellite Receiver.
Connect one end of the AC power cord to the
Satellite Receiver’s AC IN jack. Connect the
plug end to an AC outlet. This will turn unit on.
Satellite Receiver’s AC IN jack. Connect the
plug end to an AC outlet. This will turn unit on.
When replacing the access card, the system will
prompt you with instructions. Gently remove the
card from its slot. If you have to reinsert the card,
you should have the ARROW facing forward into
the box and the GOLD CHIP facing down. Push
the card into the slot as far as it will go, the end
will be visible outside of the slot.
prompt you with instructions. Gently remove the
card from its slot. If you have to reinsert the card,
you should have the ARROW facing forward into
the box and the GOLD CHIP facing down. Push
the card into the slot as far as it will go, the end
will be visible outside of the slot.
The old card passes information to the new card,
and then the old card no longer functions.
and then the old card no longer functions.
R
EPLACING
T
HE
A
CCESS
C
ARD
• YOUR ACCESS CARD IS FRAGILE.
• ALWAYS INSERT CORRECTLY AND
• ALWAYS INSERT CORRECTLY AND
CAREFULLY.
• DO NOT BEND.
• DO NOT REMOVE AND RE-INSERT
• DO NOT REMOVE AND RE-INSERT
UNNECESSARILY.
• NEVER SUBMERGE IN LIQUID OR
APPLY CLEANING FLUIDS.
C
AUTION
s
Next, go to Switching your Satellite Receiver On and Off on page 12.
S
MART
H
ELP
Once the Satellite Receiver is powered on,
the Installation Wizard will appear on your TV
screen. You should then proceed to the Installation
Wizard details on page 19.
Wizard details on page 19.
Note: The Installation Wizard will remain on
the screen only for a few minutes and needs to
be accessed as quickly as possible. This screen
will ONLY appear the very first time your
Satellite Receiver is in use.
the screen only for a few minutes and needs to
be accessed as quickly as possible. This screen
will ONLY appear the very first time your
Satellite Receiver is in use.