Справочник Пользователя для DISH Network 118523

The

 is for use with high-quality digital 

sound decoding systems. Connect the 

 

with a Digital Audio Optical cable (available at consumer 

electronics stores).

The 

 is used if you want the satellite 

receiver to connect the tuner of the nearby TV to an off-air 

antenna or cable TV system when the satellite receiver is turned 

off or when using the TV/VIDEO button on Remote Control 1. 

Use a coaxial cable to make this connection to an off-air antenna 

or cable TV system. The 

 connection is 

color coded black. Your nearby TV must be connected to the 

 output to use this feature.

The following connections provide menus and programming to the remote TVs. 

These connections are active when the satellite receiver is in 

 or in 

 with 

 enabled.

The 

 connection provides good quality video and 

stereo audio for the remote TV(s). Use a coaxial cable to make 

this connection to your home cable system. Remote TVs 

connected to the home cable system can receive programming 

from this receiver output. The 

 connection is 

color coded yellow.

: When connecting to the home distribution (

) 

coaxial port, you must meet requirements covered under FCC 

Compliance in the Appendix. To meet these requirements, an in-line 

coaxial attenuator has been included with your receiver and may 

need to be installed using the following guidance: 

• If connecting directly to a TV tuner port, you must install the 

attenuator in the cable between the 

 port and the 

TV tuner.

• If connecting to your in-home cabling system to distribute the 

signal to a TV(s) in other rooms, in most cases you will not have 

to install the attenuator for typical in-home cabling systems.