Справочник Пользователя для Jonsered CS 2135T
English
– 19
STARTING AND STOPPING
•
Never start a chain saw unless the bar, chain and all
covers are fitted correctly. See instructions under the
heading Assembly. Without a bar and chain attached to
the chain saw the clutch can come loose and cause
serious injury.
covers are fitted correctly. See instructions under the
heading Assembly. Without a bar and chain attached to
the chain saw the clutch can come loose and cause
serious injury.
•
The chain brake should be activated when starting. Se
instructions under the heading Start and stop. Do not drop
start. This method is very dangerous because you may
lose control of the saw.
instructions under the heading Start and stop. Do not drop
start. This method is very dangerous because you may
lose control of the saw.
•
Never start the machine indoors. Exhaust fumes can be
dangerous if inhaled.
dangerous if inhaled.
•
Observe your surroundings and make sure that there is no
risk of people or animals coming into contact with the
cutting equipment.
risk of people or animals coming into contact with the
cutting equipment.
•
Always hold the saw with both hands. The right hand
should be on the rear handle, and the left hand on the
front handle. All people, whether right or left handed,
should use this grip. Use a firm grip with thumbs and
fingers encircling the chain saw handles.
should be on the rear handle, and the left hand on the
front handle. All people, whether right or left handed,
should use this grip. Use a firm grip with thumbs and
fingers encircling the chain saw handles.
Stopping
The engine is stopped by pushing the stop switch to the stop
position.
position.