Справочник Пользователя для Mitel 5320e
Mitel 5320e IP Phone User Guide
User PIN
A Personal Identification Number (PIN) allows a user to log into a set as a hot desk user. It is
also used to de-activate the Phone Lock feature. PINs must be from 0 to 8 digits in length.
Only digits (0 to 9) are permitted. The default PIN is blank (length zero).
also used to de-activate the Phone Lock feature. PINs must be from 0 to 8 digits in length.
Only digits (0 to 9) are permitted. The default PIN is blank (length zero).
Users will have one generic PIN that can be used for any required features.
The User PIN initially has a zero length, allowing a user, for example, to unlock a phone
using a blank PIN for Phone Lock. Setting the User PIN on the set requires the PIN to have at
least one digit.
using a blank PIN for Phone Lock. Setting the User PIN on the set requires the PIN to have at
least one digit.
To change the User PIN:
1. Press
SuperKey (must be programmed to a key)
2. Press
No until "Set User PIN?" appears.
3. Press
Yes softkey or the User PIN softkey.
4. At the prompt "Enter Old PIN", enter your old User PIN.
5. Press
Enter.
6. At the prompt "Enter new PIN", enter your new PIN.
Use left arrow key to correct mistakes. The PIN can include digits from 0 to 9 only and
can be from 0 to 8 characters in length.
can be from 0 to 8 characters in length.
7. Press
Enter.
8. At the prompt to verify the PIN, re-enter your new PIN again. The set confirms successful
or failed completion.
9. Press
Superkey to end the Superkey session.
- 48 -