Справочник Пользователя для Aastra Telecom 41-001343-02
Operational Features
5-60
41-001343-02 REV04 – 05.2014
Configuring “Call Waiting Tone Period”
You use the following procedures to enable or disable “Call Waiting Tone Period”.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
Aastra Web UI
1.
Click on Basic Settings->Preferences->General.
2.
In the "Call Waiting Tone Period" field,enter a time period, in seconds, that the call waiting tone will be audible on an active call when
another call comes in. Default is 0 seconds.
another call comes in. Default is 0 seconds.
When enabled, the call waiting tone plays at regular intervals for the amount of time set for this parameter. For example, if set to “30” the call
waiting tone plays every 30 seconds. When set to “0”, the call waiting tone is audible only once on the active call
waiting tone plays every 30 seconds. When set to “0”, the call waiting tone is audible only once on the active call
3.
Click Save Settings to save your changes.