Справочник Пользователя для Siemens 1190

The called extension receives an Alert tone. The call us-

ing the speakerphone is established immediately after 

this tone is received.

Required: A System Telephone with a Speakerphone at 

the destination number.

>

:

Select and press to confirm.

>

:

  Enter the code to activate or deactivate answering.

The LCR (Least Cost Routing) is designed to lower tele-

phone communications costs. When LCR is enabled, all 

outgoing calls are routed to provide the least expensive 

connection costs. A table is created listing all times of 

the day, days of the week, telephone service providers 

so that calls can be made when rates are at their low-

est. After programming, you can make calls with no 

need to enter the carrier code since LCR automatically 

uses the carrier that provides the lowest rate at the time 

the call is being placed.

Required: This feature must be configured for the sys-

tem by using the HiPath 1100 Manager.

Lift the handset.

Press this key. The LED turns on.

  Enter the code for accessing an external line (e.g., 0). 

Wait for an external line dial tone.

Enter the external number you want to call.

Wait for the call to be answered. Initiate conversation.

[1] This feature must be enabled by the destination number during 

programming (see Programming an Extension - Auto-Answering 
Mode, in the Programming Manual).

[2] Settings must be configured on the HiPath 1100 Manager.

Speaker

oi.book  Seite 38  Mittwoch, 16. August 2006  8:41 08