Справочник Пользователя для Siemens HIPATH 8000
Making calls with multiple lines
99
Step by Step
Direct station selection keys
Apart from line keys, service personnel can also config-
ure direct station selection (DSS) keys. You can use a
DSS key to call an internal station directly, pick up calls
for this station or forward calls directly to it.
ure direct station selection (DSS) keys. You can use a
DSS key to call an internal station directly, pick up calls
for this station or forward calls directly to it.
Calling a station directly
You cannot use DSS if the user is on another call (flash-
ing LED).
ing LED).
Calling from the idle menu
S
Press the relevant DSS key.
or
t
Press the key shown until the application’s
Overview
tab is active.
Select and confirm the DSS line. The key lights up and
the connection is established via the primary line.
the connection is established via the primary line.
Consultation with the DSS station
Prerequisite: You are conducting a call and service per-
sonnel have configured the DSS key for consultation.
sonnel have configured the DSS key for consultation.
S
Press the relevant DSS key for the consultation. The key
lights up and a connection is established. If the called
party answers, you can toggle, transfer the first call or
initiate a conference.
lights up and a connection is established. If the called
party answers, you can toggle, transfer the first call or
initiate a conference.
DSS call 1
Service personnel can configure the DSS key so
that the connection is also established when the
DSS station has activated do-not-disturb or call
forwarding.
that the connection is also established when the
DSS station has activated do-not-disturb or call
forwarding.
If service personnel have configured transfer in-
stead of consultation, you can only transfer the
current call to the DSS station.
stead of consultation, you can only transfer the
current call to the DSS station.