Справочник Пользователя для Mitel 5360

Getting Started

Page 8

Mitel

5360 IP Phone User Guide – Issue 2, February 2011

Viewing the Phone Information

You can use the phone to view system or phone information.

To view system information:

1. Press

(Applications).

2. Press

Settings, and then press About 5360 IP Phone. The About menu appears.

3. Press

X (Close) to exit the About menu, and then press Close to exit the Applications

menu.

Cleaning Your IP Phone

You can wipe and clean the touch screen of your 5360 IP Phone without causing touch-
sensitive controls to be activated.

To enable Clean Mode when you clean the screen of your phone:

1. Press

(Applications).

2. Press

Clean Mode.

3. Clean the screen of your phone.
4. Press

(Applications) to end Clean Mode.

Using a Headset

When using a headset, press

(Speaker) to connect to or disconnect from calls. The

Headset icon

appears when the headset is in use. You cannot use the handset or

speakerphone when the IP phone is in Headset Mode. Disconnecting the headset automatically
enables the handset.

To connect and activate the headset:

1. Insert the headset jack into the Headset port

located on the back of the IP phone.

2. Dial

317

(Headset on/off). HEADSET MODE ON appears.

To turn off Headset Mode and activate the handset and speakerphone:

Dial 317

(Headset on/off). HEADSET MODE OFF appears.

NOTES

The headset must be hearing aid compatible (HAC).
If your headset has a power-saver mode, make sure the system administrator has
enabled the “Headset Connect Tone” feature. If this is not enabled, you may miss
the first few seconds of an incoming call.

NOTE

Because Headset Mode disables the handset and speakerphone, you
must turn off Headset Mode before you can use the handset or
speakerphone.