Справочник Пользователя для Panasonic KX-UTG200
Value Range
•
Y (Enable firmware updates)
•
N (Disable firmware updates)
Default Value
Y
Web User Interface Reference
FIRM_VERSION
Value Format
String
Description
Specifies the firmware version of the unit (e.g. nn.nnn [n=0-9]).
Note
•
Changing this setting may require restarting the unit.
Value Range
Not applicable.
Default Value
Empty string
FIRM_FILE_PATH
Value Format
String
Description
Specifies the URL where the firmware file is stored.
Note
•
This setting is available only when
"FIRM_UPGRADE_ENABLE" is set to "Y".
"FIRM_UPGRADE_ENABLE" is set to "Y".
•
Changing this setting may require restarting the unit.
Value Range
Max. 1024 characters
Note
•
The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>".
"<scheme>://<user>:<password>@<host>:<port>/<url-path>".
–
"<user>" must be less than 127 characters.
–
"<password>" must be less than 127 characters.
–
"<user>:<password>@" may be empty.
–
":<port>" can be omitted if you do not need to specify the
port number.
port number.
•
If "{mac}" is included in this URL, it will be replaced with the
unit’s MAC address in lower-case.
unit’s MAC address in lower-case.
•
If "{MAC}" is included in this URL, it will be replaced with the
unit’s MAC address in upper-case.
unit’s MAC address in upper-case.
•
If "{MODEL}" is included in this URL, it will be replaced with the
unit’s model name.
unit’s model name.
•
If "{fwver}" is included in this URL, it will be replaced with
"FIRM_VERSION" depending on the system. Note that this rule
differs from other parameters such as "SIP_USER_AGENT".
"FIRM_VERSION" depending on the system. Note that this rule
differs from other parameters such as "SIP_USER_AGENT".
Default Value
Empty string
228
Administrator Guide
Document Version 2014-05
5.3.5 Firmware Update Settings