Справочник Пользователя для Panasonic KX-TG5100M

The unit does not work.

• Check the settings (p. 11–13).
• Check whether the dialing mode setting is 

correct (p. 18).

• Charge the battery fully (p. 12).
• Clean the charge contacts and charge again 

(p. 13).

• Install the battery properly (p. 12).
• Unplug the base unit’s AC adaptor to reset it. 

Plug in, and try again.

• The handset has not been registered to the 

base unit. Register the handset (p. 67, steps 
5 and 6).

• Re-install the battery (p. 12) and charge it 

fully.

“Recharge battery” is 
displayed, “

” flashes 

or the handset beeps 
intermittently.

• Charge the battery fully (p. 12).

“Charge for 6 HRS” and 
“

” are displayed and the 

handset does not work.

• The battery has been discharged. Charge the 

battery fully (p. 13).

You charged the battery fully, 
but “Recharge battery” is 
still displayed and/or “

” 

continues to flash, or “Charge 
for 6 HRS

” and “

” are 

displayed.

• Clean the charge contacts and charge again 

(p. 13).

• Install a new battery (p. 12, 13).

The CHARGE indicator does 
not go out after the battery 
has been charged.

• This is normal.

If you cannot solve your 
problem

• Call our customer call center at 

1-800-211-PANA(7262).

• Panasonic’s e-mail address for customer 

inquiries:
consumerproducts@panasonic.com 
for customers in the USA or Puerto Rico 
ONLY