Справочник Пользователя для Panasonic KX-TG7341NZ

27

L

The next step must be completed 
within 90 seconds.

Handset:
Wait until “Enter Base PIN” is 
displayed. i Enter the base unit 
PIN (default: “0000”). i M
L

If you forget your PIN, contact 
your nearest Panasonic service 
centre.

L

When the handset has been 
registered successfully, w stops 
flashing.

Note:
L

When you purchase an additional 
handset, refer to the additional 
handset’s installation manual for 
registration.

Deregistering a handset
A handset can cancel its own 
registration (or the registration of 
another handset) that is stored in the 
base unit. This allows the handset to end 
its wireless connection with the system.

K

 (middle soft key)

{V}

/{^}: “Base Unit Setup” i 

M

{

3}{3}{5}

{V}

/{^}: “Deregistration” i 

M

L

The numbers of all handsets 
registered to the base unit are 
displayed.

Select the handset(s) you want to 
cancel by pressing the desired 
handset number. i M
L

The selected handset number(s) 
flashes.

L

To cancel a selected handset 
number, press the number again. 
The number stops flashing.

{V}

/{^}: “Yes” i M

L

A confirmation tone sounds as 
each handset number 
disappears.

L

The handset does not beep when 
cancelling its own registration.

{ih}

You can increase the signal range of the 
base unit by using a DECT repeater. 
Please use only the Panasonic DECT 
repeater noted on page 3. Contact your 
Panasonic dealer for details.
Important:
L

Before registering the repeater to this 
base unit, you must turn the repeater 
mode on.

L

Do not use more than one repeater at 
a time.

K

 (middle soft key)

{V}

/{^}: “Base Unit Setup” i 

M

{V}

/{^}: “Repeater Mode” i 

M

{V}

/{^}: Select the desired setting. 

i

 M i {ih}

Note:
L

After turning the repeater mode on or 
off, w flashes on the handset 
momentarily. This is normal and the 
handset can be used once w stops 
flashing.

TG7341NZ(e).book  Page 27  Wednesday, September 3, 2008  11:37 AM