Справочник Пользователя для Panasonic KX-TG7743S
Problem
Cause/solution
I cannot connect a cellular phone
to the base unit.
to the base unit.
R Confirm that your cellular phone is turned on.
R Confirm that your cellular phone is within base unit
R Confirm that your cellular phone is within base unit
range (page 15).
R Depending on the state of the wireless environment,
such as the presence of any electrical interference,
there may be a delay even if the auto connection feature
is turned on. You can connect to the base unit manually
(page 20).
there may be a delay even if the auto connection feature
is turned on. You can connect to the base unit manually
(page 20).
R The cellular phone has not been registered to the base
unit. Register the cellular phone (page 18).
I cannot hear a dial tone.
R Make sure the base unit’s AC adaptor is connected
properly (page 11).
R Make sure that the CELL 1 or CELL 2 indicator lights
green (page 16).
R Make sure the telephone line cord is connected properly
(page 11).
R Disconnect the base unit from the telephone line and
connect the line to a known working telephone. If the
working telephone operates properly, contact our
service personnel to have the unit repaired. If the
working telephone does not operate properly, contact
your service provider/telephone company.
working telephone operates properly, contact our
service personnel to have the unit repaired. If the
working telephone does not operate properly, contact
your service provider/telephone company.
The indicator on the handset
flashes slowly.
flashes slowly.
R New messages have been recorded. Listen to the new
messages (page 50).
R New voice mail messages have been recorded. Listen
to the new voice mail messages (page 56).
The receiver volume is changed
to level 4 (default), even though I
set it to level 5 (maximum level).
to level 4 (default), even though I
set it to level 5 (maximum level).
R The receiver volume returns to level 4 after you hang
up. Press MjN or MkN to adjust the volume every time
or as needed.
or as needed.
Programmable settings
Problem
Cause/solution
The display is in a language I
cannot read.
cannot read.
R Change the display language (page 17).
I cannot register a handset to a
base unit.
base unit.
R The maximum number of handsets (6) is already
registered to the base unit. Cancel unused handset
registrations from the base unit (page 42).
registrations from the base unit (page 42).
Battery recharge
Problem
Cause/solution
The handset beeps and/or
flashes.
flashes.
R Battery charge is low. Fully charge the batteries (page 12).
For assistance, please visit http://www.panasonic.com/help
63
Useful Information
TG7731_41_(en-en)_1121_ver.021.p63 63
2011/11/21 12:02:15