Справочник Пользователя для Panasonic KX-TDA0484

28

Programming Guide

The parameters indicated with "*" must be changed while the VoIP Gateway Card is in the "STOP" status (see 
"2.3.1 Status Control"). The changes do not have to be followed by a reboot to become effective.

The parameters below are used to assign VoIP gateway ports 1 and 2 to the hunt groups.

For details, refer to "Detailed Explanations".

The parameters below are used to create hunt patterns.

For details, refer to "Detailed Explanations".

Hunt group 1

Hunt group 1,
Hunt group 2

Hunt group 1

Hunt group 1,
Hunt group 2

Specifies the number for the hunt pattern to be created.

When changing the current settings of an existing hunt 
pattern, first delete the hunt pattern and then re-create with 
new values.

No default

1 to 16

Specifies the leading digits in received numbers by which to 
determine the hunt group to direct incoming calls.

For example, to direct incoming calls with numbers starting 
with "9", specify the number "9" in this parameter. Likewise, 
to direct incoming calls with numbers starting with "1", specify 
the number "1".

However, if you want to direct incoming calls with numbers 
starting with "950" and "951" to separate hunt groups, it is 
necessary to make 2 hunt patterns with respective numbers, 
"950" and "951".

No default

Max. 30 digits

Specifies the hunt group to which incoming calls are directed 
first.

1

1,  2

Specifies the hunt group to which incoming calls are directed 
when the VoIP gateway port assigned to Hunt Group 
(Priority1) is busy.

-

1, 2, - (disable)