Справочник Пользователя для Panasonic KX-TG2386

Скачать
Страница из 92
FCC and Other Information
86
Operating near 2.4 GHz electrical appliances may cause interference. Move away 
from the electrical appliances.
FCC RF Exposure Warning:
This product complies with FCC radiation exposure limits set forth for an 
uncontrolled environment.
To comply with FCC RF exposure requirements the base unit must be installed and 
operated with its antenna located 20 cm or more between antenna and all person’s 
body (excluding extremities of hands, wrist and feet). The handset unit may be 
carried and operated with only the specific provided belt-clip. Other non-tested belt-
clips or similar body-worn accessories may not comply and must be avoided. The 
base and handset units must not be co-located or operated in conjunction with any 
other antenna or transmitter.
This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 
68.316. 
• Environment — do not place the unit in a room where the temperature is less 
than 5°C (41°F) or greater than 40°C (104°F). Allow 10 cm (4") clearance around 
the unit for proper ventilation. Avoid excessive smoke, dust, mechanical vibration, 
shock, or direct sunlight.
• Medical — consult the manufacturer of any personal medical devices, such as 
pacemakers or hearing aids, to determine if they are adequately shielded from 
external RF (radio frequency) energy. (The unit operates in the frequency range of 
2400 MHz to 2481 MHz, and the power output level can range from 0.04 watts to 
0.1 watts.) Do not use the unit in health care facilities if any regulations posted in 
the area instruct you not to do so. Hospitals or health care facilities may be using 
equipment that could be sensitive to external RF (radio frequency) energy.
• Routine care — wipe the unit with a soft cloth. Do not use benzine, thinner, or any 
abrasive powder. When you leave the unit unused for a long period of time, 
unplug the AC adaptor from the outlet.
• If there is any trouble — disconnect the unit from the telephone line and connect 
a known working phone. If the known working phone operates properly, have your 
unit repaired by one of the authorized Panasonic Factory Service Centers. If the 
known working phone does not operate properly, consult your telephone 
company.
When you hold the phone to your ear, noise might be heard in your Hearing Aid. 
Some Hearing Aids are not adequately shielded from external RF (radio 
frequency) energy. If noise occurs, turn the Hearing Aid mode to Telecoil. If noise 
is still heard, use an optional accessory headset or the speakerphone option (if 
applicable) when using this phone. Consult your audiologist or Hearing Aid 
manufacturer about the availability of Hearing Aids which provide adequate 
shielding to RF energy commonly emitted by digital devices.
PQQX14302ZB.book  86 ページ  2004年7月30日 金曜日 午後4時52分