Справочник Пользователя для Nokia 9356900 issue 1

 

83

List of AT Commands for Nokia 22

Copyright © Nokia Mobile Phones 2001. All rights reserved.

+CR: REL
ASYNC

given when +CR=1 and data call established; informs about the type of data call being
established

The +CR intermediate result code is given after a possible +COLP result code during a MO data
call setup. During a MT data call setup,  this is the first intermediate result code. Note that this
result code shall replace the CARRIER result code (when X5 is set). This result code is enabled
and disabled with the +CR command.

+CRING: <type>

Given when +CRC=1 and incoming MT call (no active or held calls in
ME)

This result code is enabled and disabled with the +CRC command.
NOTE: +CRING replaces the V.25ter RING result code.

<type>:

FAX

facsimile (TS 62)

VOICE

normal voice (TS 11)

REL ASYNC

normal data

ASYNC

normal data

VOICE/REL ASYNC

voice followed by data (BS 81)

ALT VOICE/REL ASYNC alternating voice/data, voice first (BS 61)
ALT REL ASYNC/VOICE alternating voice/data, data first (BS 61)
ALT VOICE/FAX

alternating voice/fax, voice first (TS 61)

ALT FAX/VOICE

alternating voice/fax, fax first (TS 61)

+CLIP: <number>,<type>

given when +CLIP=1 and number received from network when MT
call received (no active or held calls in ME)

The +CLIP result code is sent to the TE after every RING (or +CRING) result code. This result
code is enabled and disabled with the +CLIP command.

<number> string type phone number of a format specified by <type>