Справочник Пользователя для Nortel Networks 1000E
Installing and configuring IP Phones
Page 420 of 488
Communication Server 1000E
Installation and Configuration
15 Click SET.
The temporary password is set.
Figure 147
Node Temp Password
Node Temp Password
Note 1: The entered password appears as asterisks. The valid
characters are 0-9 * #. The password can be 6 to 14 digits in length.
characters are 0-9 * #. The password can be 6 to 14 digits in length.
Note 2: The temporary password automatically deletes itself after it has
been used the defined number of times or when the duration expires,
whichever comes first.
been used the defined number of times or when the duration expires,
whichever comes first.
16 Select NodePwd from the Group drop-down list.
17 Select the nodePwdShow command from the Command drop-down list.
18 Click RUN.
The updated temporary IP Phone Installer Password is displayed.
End of Procedure
Installing IP Phone hardware components
Follow Procedure 106 to install IP Phone hardware components.
Procedure 106
Installing IP Phone hardware components
Installing IP Phone hardware components
For details on installing hardware components, see IP Phones: Description,
Installation, and Operation (553-3001-368).
Installation, and Operation (553-3001-368).
1
Refer to Figure 148 on
, when installing the following:
a.
Footstand
b.
3-Port Switch only on the IP Phone 2004, required if a single Ethernet
connection is shared with a PC
connection is shared with a PC
c.
Ethernet cable from the set to the 3-Port Switch
d.
Power Transformer or Power Splitter for Power over LAN unit