Справочник Пользователя для Nortel Networks 1000E
Installing and configuring IP Phones
Page 424 of 488
Communication Server 1000E
Installation and Configuration
Configuring the IP Phone boot parameters
The IP Phone boot parameters are configured during telephone installation.
The following configuration modes are available:
The following configuration modes are available:
•
Manual configuration
— All of the IP Phone's boot parameters are statically configured at the
IP Phone.
.
•
Partial Dynamic Host Configuration Protocol (DHCP) mode
— Works with standard DHCP server. The DHCP server automatically
provides the IP Phone with an IP address; the remainder of the IP
Phone's boot parameters are statically configured at the IP Phone.
Phone's boot parameters are statically configured at the IP Phone.
.
•
Full DHCP mode
— Requires special configuration of the DHCP server to recognize the
IP Phone. The DHCP server provides all boot parameters to the IP
Phone, including IP address and server address.
Phone, including IP address and server address.
.
For configuration of the DHCP server, see Converging the Data Network with
VoIP (553-3001-160).
VoIP (553-3001-160).