Справочник Пользователя для Samsung DCS-408I

DCS 

 

    INTRODUCTION    

 

COMBINED PROGRAMMING MANUAL 

 

    NOVEMBER 2001 

 

1-3 

1.3.3 Station Level 

The system administrator or keyset user can access certain programs at a station with-

out using a passcode. At this level, only data for the selected station can be changed. 

You should refer to the instructions provided in the Samsung DCS Keyset User Guide. 

• 

1.4 Keys Used for Programming  

 

Programming may be done from any 6-button (6B), 12-button (12B) or 24-button (24B) 
keyset with a liquid crystal display (LCD). (Refer to the Samsung DCS Keyset User Guide 

for a full description of keyset operation.) 

1.4.1 Soft Keys 

The three keys directly below 

the LCD are called soft keys. 

The left-hand soft key is desig-

nated as the LEFT soft key. This 

key is used to save any 

changed data while program-

ming, or to move the cursor to 

the left on the LCD. 

 

The right-hand soft key is des-

ignated as the  RIGHT soft key. 

This key is used to save any 

changed data while program-

ming, or to move the cursor to 

the right on the LCD. 

 

 

 

 

 

 

 

 

 

1.4.2 Other Keys 

The following keys perform special functions: 

 

VOLUME UP (+) / DOWN (–) 

Scroll up/down through available options* 

KEYPAD   

 

 

Enter data  using keys 0–9 and [, and dial options* 

HOLD 

 

 

 

Clear previous entry 

ANS/RLS 

 

Select “ALL” option (e.g. to make data apply to all, 

rather than selected, stations) 

SPEAKER   

 

 

Store data and advance to next MMC 

TRSF 

 

 

 

Enter programming mode or 

  

 

 

 

 

Store data and exit programming mode 

 

 

* Note: Many MMCs allow you to dial codes using the keypad  to select options quickly. Alterna-

tively, you can press the VOLUME Up and Down keys (+ and –) to scroll through and select op-

tions. Use whichever method you prefer.