Справочник Пользователя для Samsung DCS KEYSET

Samsung DCS  

 

        Keyset User Guide 

– 48 – 

You can select one of eight ring tones for your keyset. 

 

1.  While on-hook, press the 

 key and dial 111. 

2.  Dial a number 1–8 or press the 

 Up and Down keys to 

hear each tone. 

3.  When you hear the tone that you want, press the 

key. 

 

By default, your extension passcode is 1234. You can change this 
passcode to any 4-digit number.  

1.  While on-hook, press the 

 key and dial 101. 

2.  Dial your existing (old) passcode. 
3.  Dial a new passcode (must be four characters, e.g. 3456). You 

can use numbers 0–9. 

4.  Redial the new passcode to verify. If successful, you will hear 

two beeps. (Four beeps indicate an invalid code and you should 
enter the code again.) 

5. Press the 

 key to store the new passcode. 

 

You can receive internal calls in one of three modes: Ringing, Auto 
Answer or Voice Announce (see Answering Internal Calls in the sec-
tion ‘Internal Calls’ for details): 

1.  While on-hook, press the 

 key and dial 103. 

2. Dial 0 for Ringing, 1 for Auto Answer or 2 for Voice Announce. 

(Or use the 

 Up/Down keys to select.) 

3. Press the 

 key to store your selection.