Справочник Пользователя для Samsung ITP-5012L
3-9
Load & Upgrade Set/Modify
In the Network menu, ‘3.Load & Upgrade’ menu is used to set or modify the
environment mode and upgrading of the ITP phones software. The user must
confirm the appropriate settings from their system Administrator prior tousing this
menu.
After selecting ‘3.Load & Upgrade’ menu on the LCD panel the following sub
menu will be displayed:
environment mode and upgrading of the ITP phones software. The user must
confirm the appropriate settings from their system Administrator prior tousing this
menu.
After selecting ‘3.Load & Upgrade’ menu on the LCD panel the following sub
menu will be displayed:
♦ Selecting ‘1.Load Option’ menu and its sub menu will be displayed. Ththe
user can select ‘1.File System’. to load the software program saved in the flash
memory or 2. TFTP down run to program the IP address of the TFTP server to
be used to upgrade the ITP phone software. Consult your system administrator
before trying to Upgrade your ITP phone software.
memory or 2. TFTP down run to program the IP address of the TFTP server to
be used to upgrade the ITP phone software. Consult your system administrator
before trying to Upgrade your ITP phone software.
The file system here means the flash file system existing in the flash memory of
the ITP phone. If ‘2.tftp server’ is selected from the sub menus, the program saved
in the flash memory doesn’t operate. Instead, the program existing in the TFTP
server will be downloaded to the RAM of the ITP Phone. Therefore, the user must
use the TFTP server and set its IP address to upgrade the current software on the
ITP phone.
the ITP phone. If ‘2.tftp server’ is selected from the sub menus, the program saved
in the flash memory doesn’t operate. Instead, the program existing in the TFTP
server will be downloaded to the RAM of the ITP Phone. Therefore, the user must
use the TFTP server and set its IP address to upgrade the current software on the
ITP phone.
Use the dial buttons to enter the TFTP server IP Address and the [*] button to enter ‘.’. After the
correct TFTP Server IP address has been entered press the [Enter] button to save
the setting.
the setting.
♦ The ‘2.Upgrade Program’ menu is used to upgrade the ITP software programs.
Set the IP address of TFTP server that the user wants to upgrade and then press
the [Enter] button
the [Enter] button
♦ The ‘3.Upgrade Bootrom’ menu is used to upgrade the ITP Phone’s Bootrom.
Load & Upgrade (1/4)
1.Load Option
2.Upgrade Program
3.Upgrade Bootrom
4.Format