Справочник Пользователя для Samsung ITP-5107SIP
>1.SYSTEM EASY WIZARD
2.SYSTEM INFORMATION
3.NETWORK SETUP
4.LOAD & UPGRADE SETUP
5.SYSTEM SERVER SETUP
6.FACTORY RESET
8
ITP-5107S SETUP
INITIALIZING THE ITP-5107S
Initially the ITP-5107S IP keyset will need to be setup to operate within the users
network. The Setup Menu is also used to make changes to the keyset, in the event
that the system information should change. The option chosen via scroll key will
be highlighted.
network. The Setup Menu is also used to make changes to the keyset, in the event
that the system information should change. The option chosen via scroll key will
be highlighted.
The station numbers will be automatically set by the OfficeServ 100, OfficeServ
500, and the OfficeServ 7000 Series systems once the necessary information has
been entered into the IP keyset. Enter ID and password of the server, as described
below to register the phone.
500, and the OfficeServ 7000 Series systems once the necessary information has
been entered into the IP keyset. Enter ID and password of the server, as described
below to register the phone.
See your system administrator for specific Network and Server addresses. The
addresses necessary to set up the ITP-5107S are:
addresses necessary to set up the ITP-5107S are:
•
IP Address of the ITP
•
Network Gateway Address
•
Subnet Mask
•
IP Address of System’s MCP
•
User ID
•
Password
SETUP MENU
TO GET TO THE SET-UP MENU, UNPLUG THE POWER FROM THE ITP-5107S
PHONE OR UNPLUG THE LAN CABLE IF USING POWER OVER ETHERNET,
PRESS AND HOLD THE
PHONE OR UNPLUG THE LAN CABLE IF USING POWER OVER ETHERNET,
PRESS AND HOLD THE
BUTTON ON THE DIAL PAD WHILE PLUGGING IN THE
POWER CORD OR LAN CABLE IF USING POWER OVER ETHERNET BACK INTO
THE PHONE. NOW RELEASE THE
THE PHONE. NOW RELEASE THE
BUTTON.
Other items not shown on screen when scrolling down.
5107S_keyset.qxp 5/9/2006 9:56 AM Page 14