Справочник Пользователя для AT&T System 85

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

When ISDN terminals are initially installed, a unique SPID number must be entered into the ter-

minal.  This number identifies the terminal to the network.  Usually, the system manager provides

the SPID for each terminal in the system.  Use the following procedure for entering the SPID in

an ISDN 8528T terminal.

1. Press 

cbbbbbbbbc

bbbbbbbb

and then press 

cbbbbbbbbc

bbbbbbbb

.

2. Dial the numbers, ‘‘43’’ (ID).

3. Press 

cbbbbbc

bbbbb

on the dial pad.

4. Enter digits from the dial pad for a new SPID number.  If, at any point, you make a mis-

take, press 

cbbbbbc

bbbbb

to erase the number and re-enter the SPID.

5. When the SPID number is correct, press 

cbbbbbc

bbbbb

on the dial pad to save the new SPID in

the terminal.

The 8528T cannot be used as an emergency station during power failure transfer conditions.

The 8528T voice terminal is FCC registered as a Class A terminal.

This terminal is compatible with the inductively coupled hearing aids as required by the FCC.

The 8528T voice terminal and optional components can be ordered with the following Price Ele-

ment Codes (PECs) and COMCODES:

d

PEC: 3xxx-001 (AT&T Black=COL09;  AT&T White=COL10)

COMCODE: AT&T Black=107344509;  AT&T White=107344517