Справочник Пользователя для Avaya 518-456-161

Скачать
Страница из 62
PARTNER
®
 Advanced Communications System
35
PARTNER
®
 ACS 1600 DSL Module Planning Checklist
PARTNER
®
 ACS 1600 DSL Module Planning Checklist
0
Use this job aid to help you collect, organize and record the settings necessary for a PARTNER installation that includes the 1600 DSL module. 
Always double-check this data before using this document to program the module. 
There is a worksheet at the end of this checklist that you can use for settings that will not fit in the table.
All sample IP addresses used are in the private domain. In most cases, public addresses are required.
Customer: ___________________________________
Contact: ____________________________________
Phone: _______________________
Email: ___________________________
Sales person: ________________________________
Phone: _______________________
Email: ___________________________
Installer: ____________________________________
Phone: _______________________
Email: ___________________________
ISP contact: _________________________________
Phone: _______________________
Email: ___________________________
SDSL contact:________________________________
Phone: _______________________
Email: ___________________________
SDSL tech support contact: _____________________
Phone: _______________________
Email: ___________________________
Required Information 
Notes 
Sample values 
Enter values for current installation 
1. SDSL settings 
SDSL activation date
1
When service will be available at the customer site. 
NOTE: 
The SDSL provider should verify SDSL signal 
at the customer demarcation point. 
4-10-01
 
AM
 
Voice Gateway
The manufacturer connecting the SDSL calls to the 
PSTN. 
Lucent
 
PathStar, 
Copper
 
Com,
 
Jetstream
Tollbridge
Jitter delay
In most cases, the defaults for this setting are 
appropriate. If voice quality is poor, use the sample 
values shown. 
Frame Relay
 
=
 
17msec;
ATM
 
=
 
6msec
 
DSLAM
The manufacturer of the SDSL voice and data stream 
multiplexer.
 
Lucent
 
Stinger,
 
Copper
 
Mountain
 
Datalink protocol
The transport protocol: ATM or Frame Relay
ATM,
 
Frame
 
Relay
 
1. Obtained from SDSL provider
2. Obtained from ISP
3. Obtained from customer/LAN VAR