Справочник Пользователя для Mitsubishi Electronics WS-48311

Note: Included in the 

Diamond Shield™ 

package are the following items:

  (1) Diamond Shield™
  (2) Molding Clips

  Carefully remove the Diamond Shield™ from its 

protective packaging.  Wipe off any dust with a lint-free 

cloth.

  Begin by inserting the shield, sliding it into the 

channels, starting at the bottom.  Gently bow the 
Diamond Shield™ toward you and insert the 
Diamond Shield™ into the top channel.

  Install the left and right molding clips by pressing 

them into the opening starting at a corner.  Do not 
force the clip.  The clip will slide into place.  This 
completes the Diamond Shield™ installation.

REMOVAL
To remove the Diamond Shield™, reverse the order of 
the above procedure.

(WS-48311)

IMPORTANT:
The WT-42311 Diamond Shield is 

not designed to be removed by 

the Customer.