Инструкции Пользователя для Mitsubishi Electronics WS-55515
74
75
Press PIP/POP to activate. With each press of PIP/
POP on the TV remote control (within 3 seconds of
each other), PIP/POP will cycle through the following
display options:
POP on the TV remote control (within 3 seconds of
each other), PIP/POP will cycle through the following
display options:
•
POP
side-by-side
pictures
•
3 POP
• 9 POP
• PIP large
• PIP small
• PIP/POP: off
Operation of PIP and POP
PIP/POP can be turned off, 10 seconds after displaying,
by pressing PIP/POP. The next time you activate PIP/
POP, the last used PIP/POP option will be displayed
by pressing PIP/POP. The next time you activate PIP/
POP, the last used PIP/POP option will be displayed
Changing PIP/POP Device
Press PIP DEVICE to change the PIP or POP picture
source device. A menu similar to the Device Selection
menu will be displayed. Not all devices can be
displayed.
source device. A menu similar to the Device Selection
menu will be displayed. Not all devices can be
displayed.
Changing PIP/Side-by-Side Channels
Press PIP CH to scroll up and down through
memorized channels on Ant-1 and Ant-2.
memorized channels on Ant-1 and Ant-2.
Exchanging Program Images
Press EXCH to exchange the main picture and the PIP/
POP picture. This feature is only for analog pictures.
POP picture. This feature is only for analog pictures.
Moving PIP Image
If no menus are on the screen, press ADJUST , ,
or to move the PIP display anywhere on the main
screen.
Automatic POP Switching
When automatic POP switching is active, the TV will
cycle through memorized channels on Ant-1 or Ant-2 or
strobe pictures from other A/V components in the POP
display. Press PAUSE to pause or restart automatic
POP switching.
cycle through memorized channels on Ant-1 or Ant-2 or
strobe pictures from other A/V components in the POP
display. Press PAUSE to pause or restart automatic
POP switching.
Selecting POP “Live” Image
Press ADJUST , , or to select a different POP
“live” image (automatic POP switching must be paused.)
Freezing the PIP and Side-By-Side Picture
Press PAUSE to freeze the PIP and side-by-side
images. Press PAUSE again to return to a “live” image.
images. Press PAUSE again to return to a “live” image.
MAIN
PICTURE
Side-by-Side
PIP Ant-1 17
Ant-1 2 XXXX
Standard
Stereo SAP
TV-PG DLSV
SQV1
Standard
Stereo SAP
TV-PG DLSV
SQV1
PIP
MAIN
PICTURE
POP 1
POP 2
POP 3
MAIN
PICTURE
POP 1
POP 2
POP 3
POP 4
POP 5
POP 6
POP 7
POP 8
POP 9
PIP Ant-1 17
Ant-1 2 XXXX
Standard
Stereo SAP
TV-PG DLSV
SQV1
Standard
Stereo SAP
TV-PG DLSV
SQV1
PIP
Ant-1 2 XXXX
Standard
Stereo SAP
TV-PG DLSV
SQV1
Standard
Stereo SAP
TV-PG DLSV
SQV1
IMPORTANT
Side-by-Side cannot show the same channel or
device on both screens.
device on both screens.
When Ant-1 or Ant-2 is the main picture, Ant-2 is
not available as the PIP, POP or Side-by-Side.
not available as the PIP, POP or Side-by-Side.
HDMI and DVI devices can be the main picture only.
PIP/POP is not compatible with signals from IEEE
1394 or some digital channels.
1394 or some digital channels.
You can display programs from analog channels, analog inputs or devices as Picture-In-Picture (PIP) and Picture-
Outside-Picture (POP). The TV has a second analog tuner for non-scrambled analog channels received on Ant-1 and
will display them as the PIP/POP sub-pictures. Digital channels and devices can be shown as the main picture but
cannot be the sub-picture. PC screens can be viewed in the side-by-side mode.
Outside-Picture (POP). The TV has a second analog tuner for non-scrambled analog channels received on Ant-1 and
will display them as the PIP/POP sub-pictures. Digital channels and devices can be shown as the main picture but
cannot be the sub-picture. PC screens can be viewed in the side-by-side mode.