Инструкции Пользователя для Mitsubishi Electronics WT-46809

60

60

Part IV: Operation

Remote Control Functions: Display Formats

This is a wide screen TV (also known as

a 16:9 TV). This shape reflects the new

types of images available from HDTV and

many DVDs. There are still many older style

narrow screen images (called 4:3 aspect

ratio) you will encounter. While there will

never be a perfect solution for displaying

a narrow image on a wide screen, Mitsubi-

shi offers several display formats to choose

from.
Press FORMAT on the TV remote control

to cycle through the five available display

formats.

1

Standard

(Default format for DTV, Inputs

1-4, and Component inputs)

: This is the full

screen format. HDTV signals will auto-

matically use this format. This format is

also useful to display Anamorphic DVDs

that have 1.78:1 or 1.85:1 aspect ratios.

Anamorphic DVDs that have the 2.35:1

aspect ratio will still display black bars

at the top and bottom. Narrow (4:3)

images will be stretched evenly from

side to side.

2

Expand: This will enlarge the picture,

cropping off some of the image at the

sides, and top and bottom. This is

useful to reduce the letterbox top and

bottom bars of non-anamorphic DVDs or

to correct narrow (4:3) images that have

been stretched in the Standard format.

3

Zoom: This will enlarge the picture, crop-

ping off some of the image at each side.

This is useful to remove or reduce the

black top and bottom bars on anamor-

phic DVDs with a 2.35:1 aspect ratio.

4

Stretched

(Default format for ANT-A and ANT-B)

:

(Not available when viewing 480p sig-

nals) This format will stretch a narrow

(4:3) image across the screen, however,

there is less stretch in the center than

the sides. This will allow the entire

narrow image to be displayed across the

screen with less distortion than seen in

the Standard format.

5

Narrow: This format will display narrow

(4:3) images in their original shape, and

add stationary gray side bars to fill the

screen.

D

is

pl

ay F

or

m

at

s

When displaying HDTV (1080i) signals,

the FORMAT control will not operate. All

HD signals will automaticaly be shown

using the Standard format , and will fill

the screen.

Stretched and Zoom formats are not

available during PIP/POP functions.

Caution should be observed when using

the Narrow format due to the stationary

gray side bars. Please see pages 23 or

62 for guidelines concerning stationary

images.