Справочник Пользователя для Mitsubishi Electronics WS-65513

2-1

With the exception of the Service Menu access codes,
the general alignment procedures for the V23 chas-
sis remains the same as previous HD chassis.  A chart
showing all recent Service Menu Access Codes is
provided on page 12 of the Introduction.  This chap-
ter will give an overview of the following alignment
procedures.

• Initial Setup - Option Menu
• Circuit Adjustment Mode
• Convergence Adjustment Mode
• Alignment Data Storage Locations

For specific alignments, refer to the Service Manual.

Option Menu - Initial Setup
Prior to alignment, the procedures for initial setup
should be followed so that all customer Main Menu
and A/V settings are set to the factory defaults listed
in  Table 2-1 and Table 2-2.

Follow the steps below for the initial set-up:

1) Select the "MENU" display by pressing the

"MENU" button once.

2) Press the number buttons "0", "3", "7", "0"

in sequence to select the "OPTION MENU"
display.  See Figure 2-1.

3) Press the "ADJUST" button to select "INI-

TIAL."

4) Press "ENTER."

NOTE:  At this time, all Main Menu and A/
V settings will be set to the factory default
settings and channel 3 will be automatically
selected.

(MENU-0-3-7-0)

OPTION MENU
Initial
Power restore

:OFF

DTV Port

:Auto