Справочник Пользователя для Mitsubishi Electronics WD-73734
5. TV Menu Settings
43
Inputs Menu Options
Name
Cable Box,
Camcorder,
DVD, DVD2,
DVR, Game,
HD Disc,
Satellite, VCR,
PC,
On/Off (ANT
1/ ANT 2 only)
Off (HDMI
only
Camcorder,
DVD, DVD2,
DVR, Game,
HD Disc,
Satellite, VCR,
PC,
On/Off (ANT
1/ ANT 2 only)
Off (HDMI
only
)
• Assign or change names of inputs appearing in the
Input Selection
menu.
• Turn
Ant-1 and Ant-2 On or Off.
• Turn unused HDMI inputs
Off.
• Press to move between inputs.
• Press to select a name.
• If you change the name of an input after performing NetCommand
• Press to select a name.
• If you change the name of an input after performing NetCommand
“learning,” the IR codes you “learned” are erased.
Note: When you disconnect an HDMI device, the icon remains in the Input
Selection menu until you remove it. To remove an unwanted HDMI icon,
select
Selection menu until you remove it. To remove an unwanted HDMI icon,
select
Off for the HDMI input.
Order
Put frequently used icons at the start of the
Input Selection menu.
1. Press to highlight the icon to move.
2. Press
2. Press
ENTER to confirm the selection.
3. Press to drag the icon to the desired position.
4. Press
4. Press
ENTER to set the new position.
Learn
Y series and 734 series only
• Perform initial set-up of NetCommand control of a device.
• Add or remove individual keys from NetCommand control of a device.
• Perform initial set-up of NetCommand control of a device.
• Add or remove individual keys from NetCommand control of a device.
See detailed instructions in chapter 6, “NetCommand.”
AVR
Y series and 734 series only
Set up NetCommand control of an A/V receiver. This set-up allows you to:
• Operate the A/V receiver’s power and volume functions with the TV’s remote control.
• Make the A/V receiver switch automatically to the correct audio input when you select a
Set up NetCommand control of an A/V receiver. This set-up allows you to:
• Operate the A/V receiver’s power and volume functions with the TV’s remote control.
• Make the A/V receiver switch automatically to the correct audio input when you select a
device in the TV’s
Input Selection menu.
See detailed instructions in chapter 6, “NetCommand.”
Inputs Menu
Change input names using the Inputs > Name menu.
Note:
• NetCommand IR control of home-theater devices is
• NetCommand IR control of home-theater devices is
available on Y series and 734 series models only.
• When you change an input name in the
Name
menu and then exit the
Name menu:
The name is changed
The icon in the
Input Selection menu is changed
Settings are changed to the defaults for the
new device type.
new device type.
On models offering NetCommand control, all
“learning” for the input is also erased.
“learning” for the input is also erased.