Справочник Пользователя для Mitsubishi Electronics WD-73734

Manual Power On/Off
Use for devices that have only one 

POWER key.

1.  Press 

INPUT to display the Input Selection 

menu.

2.  Press          to highlight the icon for the 

device to be powered on or off.

3.  With the 

Input Selection menu still displayed, 

press 

POWER to send the power signal; you may 

need to press 

POWER twice.

Note:  If you press POWER without the Input 
Selection displayed, the TV will turn off.

4.  Press 

ENTER to switch the TV to the device.

Automatic Power On/Off
This feature is only for devices that have separate 
POWER ON and POWER OFF keys on their original remote 
controls.  If your device does not have a separate 
POWER OFF key, do not use the Power Off learn-
ing position; use only the Manual Power ON/OFF 
method described above.
In the NetCommand 

Learn screen:

a.  “Learn” the 

Power On command in the Power 

On learning position.

b.  “Learn” the 

Power Off command in the 

Power Off learning position.

• 

To Power On the Device
1.  Press 

INPUT to display the Input Selection 

menu.

2.  Press          to highlight the icon for the 

device to be powered on or off.

3.  Press 

ENTER to switch the TV to the device 

and NetCommand will send the 

Power On 

command to the device.

• 

To Power Off the Device
When you turn the TV off, the TV sends all 
learned 

Power Off commands to all devices.

1.  While watching a device, press 

INPUT to display 

the 

Input Selection menu with the device icon 

highlighted.

2.  Press 

MENU to send the menu signal to the 

device.  The 

Input Selection menu will auto-

matically clear from the screen.

Switching Audio to and from the A/V Receiver
1.  Press 

2.  Press   to show the 

Speakers option.

3.  Press   to select either 

AV Receiver or TV.

Controlling A/V Receiver Power
1.  Press 

2.  Press   to show the 

Speakers option.

3.  Press   to select 

AV Receiver.

4.  Point the remote control at the 

TV (not the A/V 

receiver) and press 

POWER to power the A/V receiver 

on or off.

Controlling Other A/V Receiver Functions
With the A/V receiver powered on and selected, the 
TV’s remote operates the volume and mute functions.  
Also, when you switch to a device in the 

tion menu, the A/V receiver automatically switches to 
the correct audio input for the device.

As an example of NetCommand control, if you are 
watching your cable box and you wish to tune to the 
next channel higher, press 

CH/PAGE  .  NetCommand 

then sends the “learned” channel-up control signal to 
the cable box.
1.  With an IR emitter properly positioned in front of the 

device, use the 

Inputs > Learn screen to perform 

NetCommand setup for the device.

2.  When you wish to use the device, press 

INPUT to 

display the 

Input Selection menu.

3.  Press          to highlight the icon for the device.
4.  Press 

ENTER to switch the TV to the device.

Note:  if you have set up automatic input switching 
for the A/V receiver, the A/V receiver will automatically 
switch to the correct input for the device.

5.  To operate the device using the 

TV’s remote 

control, set the slide switch to the 

TV position.

6.  Point the remote control at the 

TV (not the device) 

and press the key for the desired function.