Справочник Пользователя для Mitsubishi Electronics WD-73727

1.  Insert a card into a matching card slot on the front 

of the TV.  Be sure to use the correct card slot.  
Card 1 accepts SmartMedia™.  Card 2 accepts 
MultiMediaCard™ and SD Media Card.  Card 3 
accepts CompactFlash® and MicroDrive®.  Card 
4 accepts M

EMORY

 S

TICK

™ and Memory Stick Pro.  

Cards up to 1 GB, with a file format of FAT 16 (block 
size = 1024 or 2048) are supported.

Normally the label side should be up, but if the card 
does not fit, try turning the card over and insert again.  
When properly inserted, the light next to the slot will 
light up.

2.  Press DEVICE on the remote control to display the 

Device Selection Menu and then select the correct 
card slot from the list, using ADJUST          .

3.  The Media Dialog box (figure 1) will automatically 

display.  Use the AUDIO button to switch from JPEG 
Picture Slide show setup to MP3 or WMA7 Audio 
Playlist setup, or use the VIDEO button on the remote 
to switch from the MP3 or WMA Audio Playlist setup 
to JPEG Picture Slide show setup.

4.  On the remote control, press:

PLAY: 

to start the slide show or play audio.

GUIDE:  to display the JPEG Thumbnail menu (Figure 2) 

or Audio track playlist (Figure 3)

DEVICE
MENU:  to display the Media Setup menu (Figure 4 ).

For JPEG Picture Slide show:
PLAY: 

begins or resumes slide show playback

PAUSE: 

pauses or resumes playback while in the 
automatic advance mode.

FF:  

skips to the next slide.

REW: 

returns to the previous slide.

FORMAT:  single press rotates the slide 90˚.  Multiple 

presses continue to rotate the slide.

STOP: 

Stop slide show, return to memory card 
screen.

For MP3 or WMA Audio Playback
PLAY: 

begins or resumes playlist playback.

PAUSE:  

pauses or resumes playback.

FF: 

skips to the first track/song.

REW: 

skips to the previous track/song.

STOP: 

Stop playback and returns to memory card 
screen.

Using the Picture Thumbnail Menu or Audio Playlist 
Menu
For JPEG Picture Thumbnail Menu:

1.  Press GUIDE on the remote to display the JPEG 

picture Thumbnail menu.

2.  Press ADJUST          to move the highlight to 

different images (CH up/down will change pages of 
the Thumbnail menu). Use REW to go to the first slide 
and FF to go to the last slide on the page.

3.  Press FORMAT to rotate the selected image 90˚ 

(pressing FORMAT four times will rotate the image 
completely around to the original position).

4.  Press PLAY to begin playback of the Slide show from 

the selected image.  The Thumbnail menu will be 
taken down.