Справочник Пользователя для Barco PGWX-61B
43
PGXG-61B/PGWX-61B/PGWU-61B - - 2015/04/01
6. Maintenance & Service
Turn the projector off and unplug the power cord.
1.
Allow the projector to cool down for at least 30 minutes.
2.
Unscrew the sixscrews on the cover.
3.
1
Lift up and remove the cover.
4.
Lift up the air filter slowly and carefully.
5.
2
Clean or replace the air filter.
6.
3
To install the air filter, reverse the previous steps.
7.
6.2 Replacing the Air Filter
Procedure:
1
2
3
Warning: This procedure may only be performed by qualified technical service personnel.
Note: We recommends cleaning the Air filter every three months; clean it more often if the projector is used in a
dusty environment.