Справочник Пользователя для Mitsubishi Electronics WD-62825

76

77

AudioVideo

A/V Memory Reset

A/V Memory Reset allows you to select the device 

which will have the A/V Settings returned to the 
original factory settings.  To return a device’s memory 
to the original factory settings, select the device and 
then press ENTER.

Settings

Each device has its own A/V memory.  Select the 
device in A/V Memory Reset, then select Audio or 

Video to adjust the device’s individual settings.  Press 

ENTER, and the menu is removed and the individual 
settings are displayed.

Use ADJUST    or    to select the individual settings 
to be adjusted.  Use ADJUST    or    to make the 
adjustment.  For descriptions of the individual A/V 
settings see A/V Setting Descriptions, pages 77 and 

78.

AudioVideo Menu

Video Mute

Video Mute lets you display a blue background when 
no signal is being received on Inputs 1-3, MonLink, PC, 
Components 1-2 and Input DTV.

Black Enhancement

Select On to enhance the contrast in bright scenes 
for better picture quality.  Darker scenes will not be 
affected.

TV Speakers

This selection will turn on or off the TV’s internal 
speakers.  You may select Off when sending the sound 
through a separate stereo system or surround sound A/
V receiver.  When NetCommand

®

 is enabled, selecting 

the A/V receiver icon from the Device Selection menu 
automatically turns Off the TV speakers.  See the 
NetCommand information for further instructions.

Note:  To prevent damage from a sudden increase  
in volume, make sure the TV volume is set to low 
before setting speakers to ON.

Using the AUDIO or VIDEO Button on the Remote 

Control

To adjust individual Audio or Video settings directly 

with the remote control:

1.  Press AUDIO or VIDEO to cycle through the   

     available settings.

2. Press ADJUST   or   to adjust the setting.  After 

5 seconds of inactivity, the setting display will 
disappear.