Справочник Пользователя для Mitsubishi Electronics 837 SERIES

Connect your main antenna or direct cable service (no 
cable box) to 

ANT.  The ANT input can receive digital 

and analog over-the-air channels from a VHF/UHF 
antenna or non-scrambled digital/analog cable source.

The HDMI inputs support uncompressed standard and 

high-definition digital video formats and PCM digital 
stereo audio.

Mitsubishi recommends you use category 2 HDMI 
cables, also called high-speed HDMI cables, to connect 
HDMI 1.3 source devices.  High-speed category 2 cables 
bring you the full benefits of Deep Color and 

x.v.Color.

These HDMI inputs can also accept digital DVI video 

signals.  To connect a device’s DVI output to the TV’s 
HDMI input, use an HDMI-to-DVI adapter or cable plus 
analog audio cables.  Connect the analog audio cables to 
the 

DVI/PC INPUT AUDIO jacks on the TV to receive left 

and right stereo audio from your DVI device.

Use the HDMI inputs to connect to CEA-861 HDMI com-
pliant devices such as a high-definition receiver or DVD 
player.  These inputs support 480i, 480p, 720p, 1080i, 
and 1080p video formats.

The TV’s HDMI inputs are compatible with many DVI-D 

and HDMI computer video signals.

These inputs are HDCP (High-Bandwidth Digital Copy 

Protection) compliant.

Connect devices with component video outputs to this 

jack.  Use the adjacent 

AUDIO R and L jacks if you wish 

to send audio to the TV.

Connect a VCR, DVD player, standard satellite receiver, 
or other A/V device to the TV.  Use the adjacent 

R and L inputs if you wish to send audio to the TV.

Use this jack for the special IR emitter supplied with 3D 
glasses.  The emitter will send a signal that synchronizes 
your 3D glasses with the screen display.  See page 25

When connecting a DVI device to one of the TV’s HDMI 

inputs, use these jacks for left and right analog audio.

Use 

AVR AUDIO OUTPUT to send analog audio of the 

current program to an analog A/V surround sound 

receiver or stereo system.  Digital audio from digital 

channels and HDMI devices is converted to analog 
audio by the TV for output on this jack.  This is the only 
audio connection needed to the TV if using an analog 

A/V receiver or stereo system.

Headphones.  These jacks can also be used for head-
phones that accept standard line level audio signals.  

An adapter may be required.

This output sends Dolby Digital or PCM digital audio 

to your digital A/V surround sound receiver.  Incoming 
analog audio is converted by the TV to PCM digital audio.  
If you have a digital A/V receiver, in most cases this is the 
only audio connection needed between the TV and your 

A/V receiver.

837 Series.  Connect IR emitters to this jack to send 
control signals to external IR remote-controlled devices.

837 Series.  Use the RS-232C interface to receive 
control signals from compatible home-theater control 
devices.  See www.mitsubishi-tv.com for a list of 
control signals for this interface.

The TV can read JPEG photo files and mp3 music files 

from a USB device connected to the USB port.

HDMI Cable Categories
HDMI cables are available as Category 1 and Cat-
egory 2 types.

•

 (also called high-speed 

HDMI cables).  Newer, HDMI 1.3-compliant DVD 
players, video games, and set-top boxes require 
Category 2 cables, suitable for clock frequen-
cies up to 340 MHz or data rates of up to 10.2 
gigabits per second.  Use category 2 cables for 
high-speed 1080p HD signals carrying extended 
color encodings (i.e., 30 or more bits, also called 
Deep Color).  Category 2 cables are also suitable 
for standard HDTV signals.
Category 1 Cables

•

 (also called standard HDMI 

cables).  Category 1 cables may be unmarked.  
They are suitable for standard HDTV 720p, 
1080i, and 1080p signals with 8-bit color depth.  
Use category 1 cables for clock frequencies up 
to 74.25 MHz or data rates of up to 2.23 gigabits 
per second.