Справочник Пользователя для Mitsubishi Electronics 837 SERIES

When the picture 
shape seems 
incorrect, use 
MORE > 0 

(FORMAT) to 

change the shape of 
the picture.

Press the 

MORE key and then repeat-

edly press 

0 (FORMAT) to cycle 

through the available aspect ratios.

The last-used format for a signal 
type is memorized for each input.  
The next time the same input and 
the same signal type is viewed, 
the last-used format will be 
recalled.

PerfectColor™ 
Reset
or
PerfectColor™/ 
PerfecTint™ 
Reset (837 
Series)
(for the single 
input currently 
being watched)

When the color 
intensities seem out 
of balance, use the 
PerfectColor/PerfecTint 
reset to reset the color 
balances to the original 
factory settings.
Both PerfectColor and 
PerfecTint are reset at 
the same time.

While viewing the input to 

be reset, press 

MENU and 

go to 

PerfectColor.
Press 

ENTER to display the 

PerfectColor adjustment screen.
Press 

CANCEL to reset the colors.

All PerfectColor/PerfecTint 
sliders are reset to the original 
center position.  The PefectColor/
PerfecTint settings for other 
inputs remain unchanged.

A/V Memory 
Reset
(for the single 
input currently 
being watched)

When audio and/
or video settings for 
a single input seem 
incorrect, use A/V 
Memory Reset to 
return the input to 
the original factory 
settings.

While viewing the input to reset, 

press 

MENU and go to Adjust > 

Reset.
Press 

ENTER to highlight the 

Reset icon.
Press 

ENTER again to reset.

All Audio and Video settings 
for the individual input are 
reset except for the Listen To, 
Language, audio Balance, 
Closed Caption, and Advanced 
Picture settings.

You can resolve many common TV problems using 
the reset functions described in the following table.  
See also the troubleshooting suggestions later in this 
appendix.

IMPORTANT
Before you change sound or picture settings:  If 
picture or sound settings seem wrong for a broadcast 

channel (a channel from the 

ANT input, a cable box, or 

satellite receiver), first check other channels from the 
same input before changing settings.  If most other 
channels from the same input seem correct, there is 
likely a problem with the broadcast rather than with the 
TV.  Use care in this case, as changes you make to fix 
problems on individual channels also affect all other 
channels on the same input.

Service
If you are unable to correct a problem with your TV, 
consult your Mitsubishi dealer or Mitsubishi Con-
sumer Relations at (800) 332-2119.

•  DO NOT adjust any controls other than those

described in this Owner’s Guide.

•  DO NOT remove the protective back cover of

your TV.

•  To order replacement or additional remote con-

trols or lamp cartridges, visit our website at www.
mitsuparts.com or call (800) 553-7278.

•  For questions:

  Call Consumer Relations at 800-332-2119.
  E-mail:  MDEAservice@mdea.com
  Website:  www.mitsubishi-tv.com

Important
All lamps replaced under warranty must be returned 
to Mitsubishi where they will be inspected for defect 
verification.