Справочник Пользователя для Mitsubishi Electronics 737 SERIES

ENTER-Key Functions (cable boxes, satellite receivers, etc.)
Some devices have two keys that have “enter” functions.  One key is for menus and is often labelled 
SELECT or OK.  A second key is for use with number keys for direct channel selection.  NetCommand 
uses the same 

ENTER key for both operations.

When 

ENTER has a menu or guide function or 

when the original remote control uses the same 
key for menus and channel selection:
Learn the 

ENTER, SELECT, or OK key in the 

NetCommand 

Enter learning position.

Press 

MENU or GUIDE to display the device’s 

menu or guide.
Press 

ENTER within the menu and 

NetCommand will send the 

Enter signal for 

menus.

Enter (digits) When ENTER is for channel changes, i.e., the origi-

nal remote control has a separate 

ENTER key for 

this function):

Learn the 

ENTER key for channel selection in 

the NetCommand 

Enter (digits) learning posi-

tion.  Use this learning position only if the original 
remote control has separate keys for 

Enter in 

menus and 

Enter for channel selection.

Press digit key(s) and then press 

ENTER.  

NetCommand will send the 

Enter signal for 

channel selection.

CANCEL as the Cancel or Exit Function
“Learn” the 

Cancel or Exit function in the 

NetCommand 

Cancel learning position

Press 

MENU or GUIDE to display the menu or 

guide.
Press 

CANCEL and NetCommand will send 

the 

Cancel or Exit signal.

The symbol “—” can serve as the separator 
between a digital channel’s main and sub-channel 
digits, e.g., digital channel 12-1 (main channel is 
12, sub-channel is 1).
“Learn” the channel separator function in the 
NetCommand 

– (separator) learning position.

Press digit key(s) and press 

CANCEL.  

NetCommand will send the channel-separator 
signal.

  

Perform NetCommand setup for these device-specific 
keys and then access their functions with the 

MORE key.