Справочник Пользователя для Barco PGXG-61B

31

PGXG-61B/PGWX-61B/PGWU-61B - - 2015/04/01

Sharpness

Adjust the sharpness of the image.

Press the ◄ to decrease the sharpness.

 

y

Press the ► to increase the sharpness.

 

y

Noise Reduction

Reduce temporary and/or spatial noise in the image.

Press the ◄ to decrease the noise.

 

y

Press the ► to increase the noise.

 

y

Color Temp

Adjust the color temperature of the image.

Native: Default value. Native is about 5500K.

 

y

3200K: Apply about 3200K color temperature.

 

y

5400K: Apply about 5400K color temperature.

 

y

6500K: Apply about 6500K color temperature.

 

y

8800K: Apply about 8800K color temperature.

 

y

Input Balance

Adjust the gain and offset of the red, green, or blue channel of the image. This is similar to adjusting contrast, but 

only affects a single color channel.

Offset: Refer to the control of color imbalance in the darker areas of the projected image.

 

y

Gain: Refer to the control of color imbalance in the brighter areas of the projected image.

 

y

Press the ◄ to decrease the input balance.

 

y

Press the ► to increase the input balance.

 

y

Aspect Ratio

Adjust the aspect ratio of the image.

4:3: The input image is resized to a 4:3 aspect ratio.

 

y

16:10:The input image is resized to a 16:10 aspect ratio.

 

y

Native: the original aspect ratio of the source is kept and fit to screen. This is height or width whatever comes 

 

y

first.
Auto: Automatically selects the appropriate display format.

 

y

Timings

Adjust the horizontal position, phase or vertical position of the image.

Press the ◄ to decrease the horizontal position, phase or vertical position.

 

y

Press the ► to increase the horizontal position, phase or vertical position.

 

y

Auto Image

Execute the auto image adjust.

Press EXECUTE to adjust the image size, phase and timing automatically.

 

y

Force the projector to reacquire and lock to the input signal. This is useful when signal quality is marginal. After 

 

y

executing this command, the projector will enter the search status. After the signal is reacquired, the image set-

tings (H start, H phase, V start) will be optimized for the input signal.

Display Mode

Change the sequence and waveform of the image.

Bright: Default value. This preset provides maximum lumens output.

 

y

Presentation: This preset provides the best possible image for presentation and computer graphics.

 

y

Video: This preset provides the best possible image for video sources (DVD, TV, etc.)

 

y

DA

Turn on the DA function to activate the dynamic contrast.

Off: Default value.

 

y

On: Set DA on.

 

y