Справочник Пользователя для Panasonic TX-47P950A

C. TEMP (Colour Temperature)

D.PNR (Digital Picture Noise Reduction)

Set the overall colour tone of the picture.

Press to switch between modes.

STANDARD WARM COOL 

Automatically reduces undesired picture noise.

Press to switch between modes.

Reduces noise in a channel with many noises.
Remains off when receiving a strong signal.

Off:Recommended mode when receiving a strong signal.
Strong:Applies strong noise reductions regardless of input signals.
Weak:Applies weak noise reductions regardless of input signals.
Auto:Automatically reduces unwanted picture noise.

OFF 

STRONG 

AUTO 

WEAK 

100 Hz MODE 

PROGRESSIVE 

MODE Function 

100Hz MODE 

100Hz will give a steady picture for most signal transmission. 

PROGRESSIVE  Avoids “snaking/jaggy” effect when viewing TV program with 

moving characters. 

Note:
When viewing a PAL transmission (other than PAL 60) with Scan mode set to Progressive, the screen
will flicker, this is not a fault.

By pressing the Normal “N” Button on the Remote Control while the Picture menu is displayed, the selected menu will be changed
to the Normal Mode.
Normalization will not occur if the menu is not displayed when the “N” Button is pressed.
The Normal mode is the factory preset condition. Returning to this original condition is called “Normalization”.

When receiving PAL or

SECAM Signal

When receiving PAL or SECAM Signal, SCAN MODE is
displayed.

Choose the screen refresh method:

Press to switch between modes.