Листовка для Arkon CM925-S

Safety Precautions
Drilling onto the fl oor or console can permanently damage the vehicle. 
Use caution and consult a mobile install professional to avoid drilling 
into the gas tank, electrical system or other highly sensitive vehicle 
components. 

Arkon Resources, Inc. is not responsible for any damages caused to 
your car or yourself due to the installation or use of the pedestal mount.

Arcadia, CA 91006 USA

Made in Taiwan

© Copyright 2007 Arkon Resources, Inc.

Consumer Hotline:
(USA)    (800) 841-0884
(INT’L)   (626) 254-9005
                Mon-Fri. 9am-5pm, PST

Position the Floor / Console Bracket and 
drill into the fl oor or console.

Attach the Floor / Console Bracket with 
screws and cover with plastic caps.

Screw the steel shaft into the Floor 
/ Console Bracket.

Step 1. 

Step 2.

Step 3.

Floor Mount

Console Mount

For a more permanent mount, connect the 
Floor / Console Mount Bracket to the fl oor or 
console.  This will require drilling into your 
vehicle’s interior surface.

Package Contents:
(1) Seat Bolt Bracket
(1) Floor / Console Bracket
(1) Flexible Steel Shaft with Plastic Tubing
(1) Dual T Pattern Head
(3) Screws
(4) Plastic Caps
(1) Custom Cradle (CM090 or SM020)

Adjust the steel shaft by bending with 
both hands to the desired location of the 
male dual T-head. 

Use the adjustment knob (A) and wing 
nut (B) on the pedestal head to swivel or 
rotate the head position if necessary.

Align the female dual T-slots on the 
cradle to the dual T-tabs on the pedestal 
head. Insert device.

Step 1.

Step 2.

Step 3.

With a socket wrench, loosen the 
passenger seat bolt, insert the Seat Bolt 
Bracket, and retighten the seat bolt.

 

Step 2.

For a simple mount that can be easily moved 
to another vehicle, install using the passenger 
seat bolt (no drilling required).

Step 1.   Screw the fl exible steel shaft into the  
                Seat Bolt Bracket.

CM088-TS-2 15” Flexible Steel “Gooseneck” Mount
(shown with Seat Bolt Bracket attached)

Slide the T-slots of the cradle onto 
the T-tabs of the mount head.

NOTES: 
1. Tool for Seat Bolt mounting - socket wrench
2. Tools for optional Floor or Console mounting 
- drill and screwdriver
3. Do not twist the cradle or device while 
mounted on top of the pedestal to adjust the 
steel shaft as this can break the dual T grooves.

Safety Precautions
Drilling onto the fl oor or console can 
permanently damage the vehicle. Use 
caution and consult a mobile install 
professional to avoid drilling into the gas 
tank, electrical system or other highly 
sensitive vehicle components. 

Arkon Resources, Inc. is not responsible for 
any damages caused to your car or yourself 
due to the install of the pedestal mount.

Threaded Flexible
Steel Shaft

Seat Bolt Bracket

(A)

(B)

CM090

SM020