Справочник Пользователя для Polycom DOC2702A

Chapter 2-Conference Profiles

Polycom, Inc.

Define the Profile name and, if required, the Profile - General parameters: 

Enter a unique Profile name, as follows:

•

English text uses ASCII encoding and can contain the most 
characters (length varies according to the field). 

•

European and Latin text length is approximately half the length of 
the maximum.

•

Asian text length is approximately one third of the length of the 
maximum.

It is recommended to use a name that indicates the Profile type, such 
as Operator conference or Video Switching conference.
Note: This field is displayed in all tabs.

Select the conference bit rate. The line rate represents the combined 
video, audio and Content rate.
When defining a VSW profile, select a line rate that all connecting 
participants can use. Participants that their endpoint or network that 
do not support this line rate cannot connect to the conference or will 
connect as Audio Only (if resources were designated as Voice ports). 
If a high definition resolution will be selected for the conference video, 
make sure that the selected line rate is higher than the line rate 
minimum threshold defined in the flag HD_THRESHOLD_BITRATE 
for HD video Switching conferences.
The default setting is 384 Kbps.
Notes: 

•

This field is displayed in all tabs.

•

Maximum line rate at which ISDN endpoints can connect to a 
conference is 768 kbps.

Make sure that AVC Only is selected (default) to define a VSW 
conference Profile.
Note: This field is displayed in all tabs.

Enter the Profile name using ASCII characters set.
The Routing Name can be defined by the user or automatically 
generated by the system if no Routing Name is entered as follows:

•

If an all ASCII text is entered in Display Name, it is used also as 
the Routing Name.

•

If any combination of Unicode and ASCII text (or full Unicode text) 
is entered in Display Name, the ID (such as Conference ID) is 
used as the Routing Name.