Справочник Пользователя для Mitsubishi Electronics IB-1500193(ENG)-D
MDS-D-SVJ3/SPJ3 Series Instruction Manual
2-8 Wiring of the peripheral control
2 - 37
2-8-2 Wiring of the contactor control
(1) Output circuit of contactor control
A relay or photo coupler can be driven. When using an inductive load, install a diode.
(Tolerable current: 40mA or less, rush current: 100mA or less)
(2) Parameter setting
Set the following parameters for the contactor control axis.
【#2282】 SV082 SSF5 Servo function 5
bit B-A:dos3 Digital signal output 3 selection
bitB,A=
00: Disable
01:Setting prohibited
10:Contactor control output (For MDS-D-SVJ3)
11:Setting prohibited
00: Disable
01:Setting prohibited
10:Contactor control output (For MDS-D-SVJ3)
11:Setting prohibited
【#13227】 SP227 SFNC7 Spindle function 7
bit B-A:dos3 Select the digital signal output 3
bitB,A=
00: Disable
01:Setting prohibited
10:Contactor control output (For MDS-D-SPJ3)
11:Setting prohibited
00: Disable
01:Setting prohibited
10:Contactor control output (For MDS-D-SPJ3)
11:Setting prohibited
3 DOCOM
5 DICOM
15
MC
CN9
MDS-D-SVJ3/SPJ3
24VDC
Contactor
Contactor control relay
(There are also types that
are built into the contactor.)
(There are also types that
are built into the contactor.)
The servo drive unit will fail
if the diode polarity is incorrect.
if the diode polarity is incorrect.