Справочник Пользователя для Mitsubishi Electronics IB-1500193(ENG)-D

Sep. 2006

IB(NA)1500193-A

First edition created.

Mar. 2009

IB(NA)1500193-B

- "Coupling with the load" was added.

- "Global service network" was revised.

Jan. 2011

IB(NA)1500193-C

- "Outline for MDS-D-SVJ3/SPJ3 Series Specifications Manual (IB-1500158-

B)" was added.

- "Function specifications list" was added.

- The following servomotors were added.

　HF224, HF123, HF223, HF303, HF142, HF302, HF-KP13, HF-KP23, HF-

KP43, HF-KP73

- SJ-D Series and SJ-DJ Series were added.

- Descriptions for tool spindle motor was added.

- "Machine accuracy", "Installation of servomotor" and "Installation of the

spindle detector" were added.

- "Main circuit connector (CNP1,CNP2,CNP3) wiring method" was revised.

- "Connection of the full-closed loop system" was revised.

- "Connecting the spindle side detector" and "Connecting the spindle side

accuracy detector" were added to "Connection of the spindle motor".

- "External option regenerative resistor" and "Wiring of the motor magnetic

brake" were revised.

- "Wiring of the Input/output circuit" were revised.

- "Contactor connection" was changed to "Wiring of the contactor control" and

revised.

- "Wiring of an external emergency stop" was revised.

- "Wiring of orientation near switch" was changed to "Specifications of proximity

switch" and revised.

- "Setting DIP switch" was added.

- "Setting the initial parameters for the servo drive unit", "Setting the initial

parameters for the spindle drive unit" and list of parameters were revised.

- "Servo control signal" and "Spindle control signal" were revised.

- "Maximum tolerable current command value when adjusting acceleration/

deceleration time constant", "Improvement of protrusion at quadrant

changeover", and "Vertical axis drop prevention control" were revised.

- "Setting the output magnification" and "Gain adjustment" in "Spindle

Adjustment" were revised.

- Cautions were added to "Adjusting the acceleration/deceleration operation".

- "Orientation adjustment" was revised.