Справочник Пользователя для Mitsubishi Electronics FX3S-5DM
7 Installation In Enclosure
56
FX
3S
Series Programmable Controllers
User's Manual - Hardware Edition
7.3 Procedures for Installing on and Detaching from DIN Rail
7.3.3
Removal of main unit
Removal procedure
1
Open the terminal block cover, and remove the
lower terminal block cover (A in the right figure).
lower terminal block cover (A in the right figure).
2
Disconnect the connecting cables (including
expansion board and special adapters).
expansion board and special adapters).
3
Insert the tip of a flathead screwdriver into the
hole of the DIN rail mounting hook (B in the right
hole of the DIN rail mounting hook (B in the right
figure).
This step also applies for the DIN rail mounting hooks of the
special adapters.
special adapters.
4
Move the flathead screwdriver as shown in the
right figure to draw out the DIN rail mounting
right figure to draw out the DIN rail mounting
hooks of all devices.
5
Remove the product from the DIN rail (C in the
right figure).
right figure).
6
Push in the DIN rail mounting hooks (D in the
right figure).
right figure).
A
C
B
3
4
5
6
D