Справочник Пользователя для Mitsubishi Electronics FX3S-MT/DSS

16 Display Module (FX3S-5DM)

FX

3S

 Series Programmable Controllers

User's Manual - Hardware Edition

The following is a program example in which the system information has been assigned to D130 to D134 and
M400 to M414.

The specified device monitor function can change the top screen to the monitor/test screen for a device
specified by the user. 
For the specified device monitor function, specify the device type to be displayed in "D

" of the system

information (system signal 1), and specify the device number to be displayed in "D

+1" of the system

information (system signal 1). 
It is necessary to turn ON M

 to enable the test operation on the specified device monitor screen.

*1.

Maximum or minimum value of the corresponding device if the device number is set outside the
allowable range

The table below shows the device type to be displayed in accordance with the numeric value written in D

.

If any numeric value outside the range from 1 to 10 is written in D

, the specified device monitor function

is disabled.

D8158=K

D

Device type to be displayed

D

+1

Device No. to be displayed

*1

1

Input (X)

2

Output  (X)

3

Auxiliary relay (M)

4

State (S)

5

Timer  (T)

6

Counter (C) 16-bit (current value/setting value), Counter (C) 32-bit (setting value)

7

Data register (D) 16-bit

8

Data register (D) 32-bit

9

Time display

10

Counter (C) 16-bit (current value/setting value), Counter (C) 32-bit (current value)

D8159=K

M

+9

Specified device monitor display status
ON: The specified device monitor screen is displayed.
(When specified device monitor function or specified device editing function is used.)
OFF: Any screen other than the specified device monitor screen is displayed.

System information (system No.1) 
is set at D130 to D134.

M8002

FNC 12

MOV

K130

D8158

FNC 12

MOV

K400

D8159

System information (system No.2) 
is set at M400 to M414.