Справочник Пользователя для Mitsubishi Electronics FX3S-MT/DSS

16 Display Module (FX3S-5DM)

FX

3S

 Series Programmable Controllers

User's Manual - Hardware Edition

Operation button ON/OFF information can be monitored at the system information (system signal 2) 
"M +4 to M +7" while the PLC is running.

Refer to Section 16.8 for system information setting.

The programming tool can be used to monitor the system information's (system signal 2) "operation button
ON/OFF information", to verify that operation buttons are functioning properly.

Devices handled in the specified device monitor function can be changed by using both the "specified device
monitor display status" and "operation button ON/OFF information" in the system information (system signal
2).

Refer to Subsection 16.13.1 for the specified device monitor function setting procedure.

System signal 1 has no system information related to this function.

The display format for monitored values can be changed between "decimal" and "hexadecimal".

The display format can be changed for the following devices:
• Timer (T) [current value/setting value]
• Counter (C) [current value/setting value]
• Data register (D) [16-bit/32-bit],

D8159=K

M

+4

ON

[ESC] button is pressed.

OFF

[ESC] button is not pressed.

M

+5

ON

[-] button is pressed.

OFF

[-] button is not pressed.

M

+6

ON

[+] button is pressed.

OFF

[+] button is not pressed.

M

+7

ON

[OK] button is pressed.

OFF

[OK] button is not pressed.

D8159=K

M

+8

Specifying decimal/hexadecimal display format
ON: Hexadecimal   OFF: Decimal