Справочник Пользователя для Mellerware 2100

A Air concentrator

B Professional diffuser

C Filter

D Hanging ring

E   Power selector

F Temperature control

G  Cold blast button

H  Ionizer function indicator

I Round 

brush

J Semi-circular brush

K Comb

L Tweezers

M Vanity case

-  Please read this instruction leaflet carefully 

before using the appliance and keep the leaflet 

for future reference.

-  Check the mains voltage is the same as the 

products.

-  Unpack it completely and check it is in perfect 

condition and functioning well, as any factory 

defect or damage caused during transport is 

covered by the Mellerware guarantee.

-  Do not use this product near bathtubs, 

washbasins or other receptacles that contain 

water.

-  Do not use the product if your hands or feet 

are wet or when barefoot.

-  Switch the hairdryer off if you need to set it 

down, even if just for a moment.

-  If using the hairdryer in a bathroom, unplug 

it after use, as the closeness to water may be 

dangerous even when the hairdryer is switched 

off.

-  As an additional safety measure, we advise 

you to ensure that the electricity circuit that 

supplies the bathroom has a residual current 

device (RCD) with differential operating current 

that does not exceed 30mA. Please ask your 

electrical installer for advise on this matter.

-  To prevent the product from overheating, 

ensure that the air inlet holes are not blocked. 

If this happens, the automatic safety device will 

switch the resistance off.

-  If the resistance repeatedly stops working, 

unplug it from the mains and wait about 10 

to 15 minutes until the hairdryer cools down 

before plugging it in again.

-  Ensure that the air inlet holes are not blocked 

before using the hairdryer.

-  Never wind the cable around the hairdryer 

when it is still hot.

-  Always straighten the cable if it has become 

twisted and gently roll it up around the 

hairdryer.

-  Do not use this device in closed spaces with 

limited ventilation.

-   Set the power and temperature selectors to the 

desired position, always starting from the OFF 

position.

-  Slide the power selector from the lower 

position to the upper position to increase 

drying speed.

-   Slide the temperature selector from the lower 

position to the upper position to increase the 

temperature of the air flow.

-  Attach the diffuser to give the hairstyle volume.

-  For best results, the hairdryer should be used 

at low power and slow speed settings.

-  Attach the concentrator to direct the air flow to 

the desired area (ends, curls, etc.)

-  This is especially useful for setting and shaping 

the hairstyle.

-  Do not use the product without the removable 

filter.

-  Easy to clean filter.

-  Ions flow constantly from the drier as long as it 

is working, whatever position is selected.

-  unplug the product from the mains and let it 

cool down before cleaning it.

-  Clean the filter by shaking it.

-  In the event of of any anomaly in the 

connection to the mains, do not try to replace 

the cord yourself as it may be dangerous. 

Take the appliance to an Authorised Technical 

Department. The same applies to any other 

breakdown.

MW_PC20125 FashionPro_IM.indd   3

MW_PC20125 FashionPro_IM.indd   3

10/12/2007   10:45:01 AM

10/12/2007   10:45:01 AM