Справочник Пользователя для Beko DCU 6130W

20 EN

Lint and fibres released from the laundry to the 
air during the drying cycle are collected in the 
“Filter Cartridge”. 

C

Such fibre and lint are generally formed 

during wearing and washing.

C

 Always clean the filter and the inner 

surfaces of the cover after each drying 
process.

C

  You can clean the filter and filter area by 

vacuum cleaner.

To clean the filter:
1.  Open the loading door.
2.  Remove the cover filter by pulling it up and 

open the filter.

3.  Clean lint, fibre, and cotton by unravelling 

by hand or with a soft piece of cloth. 

4.  Close the filter and place it back into its
seat.

C 

Clogging may arise on the filter surface 

after using your machine for some time; if 
this occurs, wash the filter with water and 
dry it before using again. 

C 

Clean the entire inner surface of the door 

and door gasket by wiping with a damp 
cloth.

There are humidity sensors in your dryer that 
detect whether the laundry is dry or not.
To clean the sensor:
1.  Open the loading door of the dryer.
2.  Allow the machine to cool down if drying 

has been carried out.

3.  Wipe the metal sensors with a soft cloth, 

dampened with vinegar and dry them.

C

  Clean metal sensors 4 times a year.

A

 Never use solvents, cleaning agents 

or similar substances when cleaning 
since these materials can cause fire and 
explosion! 

The moisture in the damp laundry is taken from 
the laundry and condensed. Drain the water 
tank after each drying cycle or during drying 
when “Water tank” warning light turns on.