Справочник Пользователя для Beko DCU 6130W

6 EN

This section includes safety information that will 
help protection from risks of personal injuries 
or damages. Failure to follow these instructions 
shall cause any warranty to become void.

•  Never place the machine on a carpet-

covered floor, otherwise, lack of airflow 
beneath the machine may cause electrical 
parts to overheat. This will cause problems 
with your machine.

•  If the power cable or mains plug is 

damaged, you must call Authorised Service 
Agent for repair.

•  The product should not be plugged in 

during installation, maintenance and repair 
works. Such works should always be made 
by the technical service. Manufacturer shall 
not be held responsible for damages arising 
from processes carried out by unauthorised 
persons.

•  Connect the product to a grounded outlet 

protected by a fuse of suitable capacity as 
stated in the technical specifications table.

•  Operate your product at temperatures 

between +5°C and +35°C.

•  Do not use electrical devices in the product.
•  Do not connect the air exit of the product 

to the exit ducts which are used for the 
exhaust fumes of the devices operating 
with gas or other types of fuel.

•  You must provide enough ventilation in 

order to prevent gases exiting from devices 
operating with other types of fuels including 
the naked flame from accumulating in the 
room due to the back fire effect.

•  Always clean the lint filter before or after 

each loading.

•  Never operate your dryer without the lint 

filter installed.

•  Do not allow fibre, dust and dirt 

accumulation around the exhaust exit and 
at adjacent areas.

•  Power cable plug must be within easy 

reach after installation.

•  Do not use extension cords, multi-plugs 

or adaptors to connect the dryer to power 
supply in order to decrease the risk of 
electric shock.

•  Do not make any changes on the plug 

supplied with the product. If it is not 
compatible with the socket, have a 
qualified electrician change the socket with 
a suitable one.

•  Items cleaned or washed with gasoil/

fuel oil, dry-laundry solvents and other 
combustible or explosive materials as 
well as the items that are contaminated 
or spotted with such materials should not 
be dried in the product since they emit 
flammable or explosive vapor.

•  Do not dry items cleaned with industrial 

chemicals in the dryer.

•  Do not dry unwashed items in the dryer.
•  Items soiled with cooking oils, acetone, 

alcohol, fuel oil, kerosene, stain remover, 
turpentine, paraffin and paraffin removers 
must be washed in hot water with plenty of 
detergent before being dried in the dryer.

•  Garments or pillows bolstered with rubber 

foam (latex foam), shower bonnets, water 
resistant textiles, materials with rubber 
reinforcement and rubber foam pads 
should not be dried in the dryer.

•  Do not use fabric softeners and anti-static 

products unless they are recommended by 
the manufacturers of the fabric softener or 
the product.

•  This product must be earthed. Grounding 

installation decreases the risk of electric 
shock by opening a path with low 
resistance for the electricity flow in case of 
a malfunction or failure. Power cable of this 
product is equipped with a conductor and 
a grounding plug that allows for grounding 
the product. This plug must be installed 
appropriately and inserted into a socket 
which is grounded in accordance with the 
local laws and regulations.

•  Do not install the product behind a door 

with a lock, sliding door or a door that has 
a hinge against the hinge of the dryer.

•  Do not install or leave this product in 

places where it will be exposed to outdoor 
conditions.

•  Do not tamper with the controls.
•  Do not perform any repair or part replacing