Справочник Пользователя для 321 Studios 9356130
Copyright
©2003 Nokia. All rights reserved.
Getting started
13
Getting started
Note: If you set the resolution of images to High on the General settings tab, you can only
receive one motion detection image in a message. If you set the resolution to Normal, you can
receive two images. If you set the resolution to Compact, you can receive three images.
receive one motion detection image in a message. If you set the resolution to Normal, you can
receive two images. If you set the resolution to Compact, you can receive three images.
Timed imaging: check this box if you want the camera to send you images at certain intervals.
Interval for image sending: set the interval for sending timed images.
Number of sent images: set the number of images (0-10) to be captured using timed imaging before
the timed imaging function is turned off. If you set 0 as the number of images, timed imaging remains
on until you turn it off.
the timed imaging function is turned off. If you set 0 as the number of images, timed imaging remains
on until you turn it off.
When you have made the necessary changes, click Apply to use the new settings.
Thermometer tab
Note: Turn the thermometer up before using it. Do not use force. See Figure 2 on page 5.
Scale: select whether to use Celsius or Fahrenheit as the temperature scale.
Read temperature: click this button to check the current temperature in the camera premises.
Temperature limits: set the minimum and maximum limits for the temperature. You can then set the
camera to send you a notification when either of the limits has been reached. See below.
camera to send you a notification when either of the limits has been reached. See below.
Send SMS when limit reached: you can set the camera to send you an SMS notification when the
minimum or the maximum temperature is reached.
minimum or the maximum temperature is reached.
Note: After the camera has sent you a notification on the reached temperature, you need to set
the temperature limits again, if you want to continue using this function.
the temperature limits again, if you want to continue using this function.