Справочник Пользователя для JVC HD-56ZR7J

4

Preparation

Before replacing the lamp, read all the instructions.

Replacement Lamp Kit: 
 TS-CL110E

• High-pressure 110 V mercury lamp

 Possible causes of shortened lamp life

 Turning on/off the TV repeatedly in a short amount of time
 Keeping the TV turned on for more than 24 hours consecutively

This lamp is for use with JVC 
model televisions. Using the 
lamp with a different television 
or other product could cause a 
malfunction and/or damage to 
the television or lamp.

 If you feel unsure about replacing the lamp yourself 

Consult your retailer

LAMP NEEDS TO BE REPLACED. 
PLEASE REFER TO THE MANUAL FOR 
REPLACEMENT INSTRUCTIONS.

AFTER REPLACING THE LAMP, 
PLEASE RESET THE TIMER IN THE 
TV MENU.

PRESS OK, IF YOU DO NOT WANT 
TO SEE THIS MESSAGE AGAIN.

 To make the message disappear

Turn the TV off

Wait until the LAMP 
indicator stops 
blinking

1

Unplug the TV

2

Wait for at least 1 hour until the lamp has fully cooled

 For purchasing the Replacement 

Lamp Kit, consult your retailer.

3

The TV uses a lamp to project the picture onto the screen. When the lamp has blown or when the 
picture becomes dark, replace the lamp.
Before replacing the lamp, read all the instructions carefully.

Prepare the Replacement Lamp Kit

When the lamp is near to its end...

 The following message appears on the screen.

After the usage time of the lamp has reached to 6500 hours, this 
message appears every time you turn on the TV.

Remove the lamp cover

Remove the lamp unit

2

Remove the lamp unit

Philips head type screw 
driver (cross-head type)

1

Attempting to replace the lamp with the TV plugged in could lead to a severe electrical 
shock.

The lamp becomes extremely hot while in use, which may cause a burn. After turning 
off the TV, wait for at least 1 hour.

Loosen

Remove