Справочник Пользователя для Lucent Technologies 4.1
■
If you install a voice messaging system, assign the system extensions
associated with the voice messaging system hardware to Hunt Group 7.
Then, use this procedure to assign outside lines to Hunt Group 7 for
Automated Attendant Service. Callers hear a greeting and are prompted to
enter digits to transfer to a specific extension or group without the
assistance of the receptionist.
associated with the voice messaging system hardware to Hunt Group 7.
Then, use this procedure to assign outside lines to Hunt Group 7 for
Automated Attendant Service. Callers hear a greeting and are prompted to
enter digits to transfer to a specific extension or group without the
assistance of the receptionist.
Valid Entries
1 =
Assigned (for hunting to groups 1–6, or to group 7 for the voice messaging
system’s Automated Attendant Service)
system’s Automated Attendant Service)
2 =
Not Assigned
✔
3 =
VMS Line Cover (available only for Hunt Group 7)
Programming
1.
2.
3.
4.
5.
6.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
#
] [
2
] [
0
] [
6
].
At the
Group:
prompt, enter a group number (1–6; 7 for the voice messaging
system). For example, to select group 1, press [
1
].
At the
Line:
prompt, enter the desired line number. For example, to select
line 1, press [
0
] [
1
].
To assign or remove a line for groups 1–6, or to assign or remove a line or use
VMS Line Cover for group 7, press [
VMS Line Cover for group 7, press [
Next Data
] until the appropriate value
displays.
At this point:
■
To program another line, press [
Next Item
] or [
Prev Item
] until the line number
shows on the display. Then repeat Step 4.
■
To program another group, press [
Next Procedure
] [
Prev Procedure
], enter a
new group number, and repeat Steps 3 and 4.
Select another procedure or exit programming mode.
Group Call Distribution (#206)
5-95